The edges sealed by heavy-duty edge banding machines are prone to falling off, possibly due to various reasons. Here are some possible solutions:
Check the quality of edge banding materials: Ensure that the edge banding materials used are of superior quality, with good softness and wear resistance. Poor quality edge banding materials may cause the edges to be unstable and prone to falling off.
Adjust the parameters of the edge banding machine: operate the edge banding machine according to the specified parameters such as temperature, speed, and pressure. Improper operation parameters may lead to poor edge sealing, which in turn can cause edge dropping problems.
Maintenance of edge banding machine: Regular maintenance of the edge banding machine, including cleaning, adding lubricating oil, replacing worn parts, etc. Ensuring the stable structure and normal operation of the edge banding machine can improve the quality of edge banding and reduce the phenomenon of edge falling.
Check the sawing unit of the edge banding machine: Poor performance or improper operation of the sawing unit may lead to poor edge banding. For example, problems such as collision of sawing units and uneven head alignment may affect the edge sealing effect. Therefore, it is necessary to regularly check the working status of the sawing unit and make adjustments according to the actual situation.
Check the pressure setting of the edge banding machine: Adjust the pressure of the edge banding machine to ensure that the pressure is moderate, neither too high nor too low. Appropriate pressure can ensure firm edge sealing and reduce edge dropping.
If the above methods still cannot solve the problem, it is recommended to contact the manufacturer or professional technical personnel of the edge banding machine for further inspection and maintenance. At the same time, when operating the edge banding machine, be sure to pay attention to safety and avoid touching dangerous parts such as the cutting blade.
